Adding chemicals to pools is one of the skills every pool owner aspires to have. You always have to be too careful not to unbalance the pH level. With such, you have to understand the right chemical to use, how to apply it, and at what proportion is best.
Also, timing is a crucial thing to consider. At every application, you need to know the waiting time between every chemical you applied and as well as the waiting time before swimming.
Right here in this article, we will be providing some disturbing questions about the timeframe between adding pool chemicals and the dangers involved when you don’t adhere.
Wait Time Between Adding Pool Chemicals
The wait time between adding chemicals to a pool depends if you adhere to the best practice. Under normal conditions and with the best practice in mind, it is usually between 10-20 minutes at each application.
Swimmers are also expected to start having fun in their pool 2-4 hours after applying the chemicals. However, make sure the chlorine level is around 5ppm before swimming or, better still, wait for 24 hours.
When we talk of best practices, it is essential to know that your pump plays a crucial role in how fast your chemical mixes. When you turn your pump high and pour the chemical slowly on the return, the result is always faster, and the wait time is always lesser. In the same way, when you turn your pump low, the chemicals take time to mix, thus increasing your wait time.
For effective results, remember to vacuum or scrub the walls of the pools before applying chemicals to the pool. This ensures that debris and dirt that could have affected the water chemistry are removed before adding chlorine. You can also invest in a robotic pool cleaner that continuously cleans your pool.
Also, remember that if you have an inground or above-ground pool with vinyl liner, you would need to dissolve the chlorine before adding it to the pool for effective results.
Can You Add Pool Chemicals at The Same Time?
Adding chemicals at the same time isn’t the best practice for treating pools. The orderliness of adding chemicals is based on the level of pH and alkaline presence in the water. If you find your alkalinity and pH level too high, you need to find a pH reducer to take it down to normal.
Suppose you have maintained the total alkalinity between 60-120 ppm and pH to be between 7.2 and 7.5. Then, you can focus on the calcium hardness and the choline levels.
A lot of damage can be done to your pool walls and your health if you don’t understand the time intervals between applying chemicals and swimming. Never go into the pool immediately after applying chemicals because you risk having eye and skin irritation. If the chlorine happens to get to your lungs, you could also suffer shortness of breath, wheezing, and chest tightness.