If you’re thinking of how to dissolve feces in toilet, here are a quick few ways to dissolve poop in your toilet. You can perform these methods in every type of toilet easily but the job is not easy as you have to be patient for the poop to dissolve. However, I believe you can handle this job with minimum cost. Here are the few steps on how to get hard poop to flush.
How to Dissolve Feces in the Toilet
If you find yourself in this situation don’t be scared as there are various ways to handle the problem. These ways include;
- Using your toilet brush
You probably own a toilet brush beside your toilet which you use to clean the remnants of poop after you flush. You can also use this brush when poop blocks your toilet. What you have to do is use the brush and force the poop down the toilet drain.
Pick up the brush, and attempt the push the poop back into the pipe while flushing the poop at once.
Be careful while doing this to not splash poop around the toilet bowl. You can only do this when the drains allow for things to go down but if it doesn’t? Then you may need a plunger.
- Use of a Plunger
Another means of getting hard poop to flush is by using a plunger. When selecting a plunger, choose the one that’s big enough to let you create a vacuum in the bowl. Insert the plunger and create an upward and downward movement slowly.
AS you make this movement, you create a vacuum big enough for unclogging. As you move the plunger up and down, increase your speed slowly until the poop moves down the drain then flush once again.
If the water is going down slowly, repeat the process until the water goes down normally. If you don’t do this you’ll create a new problem for yourself.
- Make use of your hands
You can also use your hands to get hard poop to flush but it’s an unattractive way of forcing the poop down the drain. For this job, it is recommended that you wear gloves before you begin since it’s a dirty job.
You will need a plunger and garbage bag to do this one. Hold the plunger using your hands and pump the toilet system. After a few minutes, some of the poop will be stuck on the plunger. Remove them carefully and put them into the bag. Make sure you flush to see if everything works fine.
- Plastic coated Hanger
You can use a hanger with the plastic coatings to extract the poop from your toilet if you don’t want to get your hands dirty. Always use those with plastic coatings as not to damage the porcelain.
Put on your gloves and with a plier remove the plastic coating. Insert one end into the toilet and begin extracting the poop. Once you successfully remove the poop, flush the toilet several times to clean the bowl.
- Using boiling water and dishwashing liquid
You can dissolve feces in the toilet with the use of hot water. But you have to be patient because you will spend enough time. To get the job done you must be persistent to perform the process severally. To begin the process;
Pour hot water in your toilet basin. Pour enough for the hot water to replace the cold water. Give it five to ten minutes for the poop to dissolve. Once it finishes dissolving, flush. If after flushing the toilet, the poop refused to go down fully, repeat again but pour the dishwashing liquid into the toilet and add enough hot water again. Wait for another five to ten minutes after which you flush once more.
With this method, your hands will not be dirty which serves as an advantage to you. But you have to be careful so you don’t get burned.
These are easy to do steps to get your poop to flush down your toilet without spending too much or needing the help of an expert. You can try any of these methods and expect a successful result.
Leave a Reply